How to improve the working stability of LED display

The main reason for improving the stability of work is to work hard on maintenance. The power supply is required to be stable, and the grounding protection is good. Do not use it under harsh natural conditions, especially strong lightning. To avoid the problems that may be encountered, we can choose passive protection and active protection, and try to keep the items that may damage the full-color display screen away from the screen. When cleaning the screen, wipe it as gently as possible to reduce the possibility of injury. Minimized. Turn off the LED display first, then turn off the computer.

Keep the humidity of the full-color LED display's large-screen operating environment, and don't let anything with moisture properties enter your full-color LED display screen. Powering up large screens with full-color displays that contain humidity can cause corrosion of parts of the full-color display, causing permanent damage.

If water enters for various reasons, immediately switch off the power and contact maintenance personnel until the display panel inside the screen is dry.

LED display switching sequence:

A: Turn on the control computer and enable it to run normally before turning on the LED display screen.

B: It is recommended that the large screen of the LED display screen be more than 2 hours daily. In the rainy season, the large LED screen screen should be used at least once a week. Normally, the screen is turned on at least once a month and lighted for more than 2 hours.

Do not play for a long time in the full white, full red, full green, full blue and other bright screen, so as to avoid causing excessive current, power line heat is too large, LED lamp damage, affecting the display life.

Do not disassemble or splicing the screen arbitrarily! The full-color LED display screen has the closest relationship with our users. It is also necessary to do a good job of cleaning and maintenance.

Exposure to the outdoor environment for a long time, such as wind, sun, dust, etc., is easily dirty. For a while, the screen must be dusty. This requires timely cleaning to dustproof soil for a long time to affect the viewing effect.

LED display screen surface can be wiped with alcohol, or using a brush, vacuum cleaner dust, can not be wiped directly with a damp cloth.